2010-05 WRC Newsletter
Page 1
Wythall Radio Club voted RSGB Region 5 Club of the year 2009 Wythall Radio Club meets from 8pm every Tuesday evening at Wythall House, Wythall Park, Silver Street, Wythall, B47 6LZ, near Birmingham. Visitors are very welcome. Wythall Radio Club is affiliated to the Radio Society of Great Britain g1wac@wythallradioclub.co.uk http://www.wythallradioclub.co.uk Newsletter May - June 2010 Officers Chairman: Vaughan M0VRR Secretary: Chris G0EYO Treasurer: David G0ICJ Committee - Martin G8VXX Chris G6KMQ Lee G0MTN Contest Liaison Peter M5DUO Antenna maintenance. Mike G4VPD Mel M0MAJ Martin G7WBX Colin M0GJM QSL manager Neil M0YMM IT manager Tom G3PQP Homebrew Leader Chairman’s Message to enter the Club of the Year award and had to submit a resume of why they thought they ought to get the award. The club are very proud to win this award and our success is down to the good spirit engen- dered by its members who look Wythall Radio Club has been awarded RSGB Region 5 Club of the Year for 2009 Along with the winners of the other 13 regions, our entry was considered for National Club of the Year 2009. and the win- ner was announced at the RSGB AGM held in Bedford on the 17th of April. This is the first time a Regional Club of the Year award has been made in region 5 and it follows from a successful introduction of the award in Region 4 (North East England). Region 5 covers Central Eng- land in which there are 30 radio clubs. All UK clubs were invited to have fun in the things that the club does. Well done everybody. On Tuesday 13th April, Trevor Bai- ley M0KMB, our Region 5 manager, came along to the club to present the certificate of award to Chris G0EYO and the shield to Vaughan M0VRR. We will keep the certificate perma- nently but the shield, which is sponsored by LAM com- munications of Barnsley will be returned after one year. Chris G0EYO I must start by saying a BIG thanks to all members who helped to make this years rally a great success; we have received a number of complements from both Traders and mem- bers of the public. A job well done so thank you. I’m wondering if we have had any of our members, friends or family affected by the Icelandic volcano? Well there sure was dis- ruption to the International Amateur Radio Union region 1 executive committee meet- ing; with delegates stranded at various air- ports only a few made it to Sofia. The meet- ing eventually took place via web confer- ence. I have been approached by a number of members new and long standing, some local and some not so local with regards to having more of an input into committee meetings. Not all people are comfortable talking in front of a room full of people, starting discus- sion, making comment or suggestions. I have given this some thought as to how we can include the voices of members that may not always be heard. So I have set up an email address yoursay@wythallradioclub.co.uk that will drop into an anonymous inbox. We can then have an agenda item called “yoursay” where I will raise any points and make com- ments or suggestions on behalf of the mem- ber. I don’t suppose there will be many but the facility is there if needed. Well it must be springtime as my garden has burst into life and is now looking like a set for a wild life TV program. Sherryn definitely has more green in her fingers than me; this year we not only have tomatoes but beans, peppers, peas and even chillies. I’m still hoping that my tennamast seed grows into a beautiful tower….. One day maybe..See you at Plug and Play weekend. 73s Vaughan Come and join us for a plug and play weekend in Wythall Park with GB4VE Over the weekend of the 8th and 9th of May the club is hav- ing the first Plug 'n' Play Radio Day. The idea is to have a stress free fun weekend playing radio in the great outdoors. We have arranged to use the same field as we use for VHF NFD for the Saturday and Sunday with camping over night on the Sat- urday. The Club's Radio Van with push up mast and Gas Generator will also be on site for the whole weekend. So this is your opportunity to come and familiarise yourself with the Radio Van, setting up a special event station, how is the best way to start the genera- tor, what plugs go where etc.. We shall have some of the clubs HF wire antennas and a UHF/ VHF vertical plus various feed- ers, PSU's and radios BUT bring your own radios, bits of wire, ATU's and anything you want to have a go at. May be we can put up a wire loop hanging from the trees or make a c-pole etc.. Basically there are no hard and fast rules we can put something up give it a go change its direc- tion try again... try something else etc.... And to top all this off, this same weekend happens to be the 65th anniversary of VE day and Chris EYO has managed to get a special event call sign GB4VE so you could make some nice contacts. It's a self catering weekend but I'm sure the club can stand the cost of some soft drinks, bring your own beer and BBQ or the local chippy is only up the road. As for weather well it's anybodies guess, dress for all seasons.. Are you interested in having a go ? Vaughan M0VRR
Page 2
Page 2 May—June 2010 under no signal conditions whilst Vr1 is used to set the full scale deflection with maximum signal input. The RSSI voltage is used to control the squelch circuit operation. Tr1, 2 and 3 form a Schmitt trigger which monitors the incoming RSSI voltage set by Vr3 (the squelch control). When the RSSI voltage exceeds the threshold voltage of the Schmitt trig- ger (approximately 0.3 volts), Tr2 is biased off. This in turn causes Tr3 to conduct allowing 12 volts to be pre- sent at its emitter. With 12 volts pre- sent at the emitter of Tr3, DC supply to the audio power amplifier is maintained and also the squelch gate (Tr4) allows audio to pass. Tr4 is simply an emitter follower (a buffer), audio from the IF chip enters the buffer via C2 and leaves via C4 to the vol- ume control. Squelched audio also passes through C3 which is connected to a phono socket on the rear of the chassis for external audio out (recording etc.). With no 12 Volts DC present at Tr3 emitter (i.e. no signal pre- sent) both the audio power amplifier and the buffer will not pass any audio thus eliminat- ing the annoying hiss present with no re- ceived signal. If you are not bothered about an external audio feed then Tr4 and its asso- ciated components can be omitted as the audio power amplifier will still be “squelched”. Also included is a busy light consisting of an LED connected to Tr3’s emitter, when there is a signal present or if the squelch is opened via the squelch control the LED will light accordingly. For such a This is the concluding part for the airband receiver. Described here are the squelch module and the audio power amplifier along with some construction details. SQUELCH MODULE The squelch module consists of discrete devices and performs well. Included in the squelch module is a simple S-meter which gives relative signal strength indication. Present on pin nine of the IF chip (TDA1072) is a voltage which varies from approximately 0.2 Volts for no signal up to approximately 2.6 volts for a signal of 300 uVolts into the receiver, it is called RSSI voltage ( received signal strength indica- tion). This voltage drives the S-meter di- rectly via a few passive components. The meter used here is from a CB set but any meter with a FSD of 50 – 200uA will be fine. R1 with Vr2 is used to zero the meter simple circuit it really does perform well, you could use a more elaborate circuit with better performance but I don’t think it is justified in this project. All of the transistors used are BC108’s (Europa again!), however any gen- eral purpose npn small signal transistor will do (BC546 etc.) AUDIO POWER AMPLIFIER As you can see from the circuit diagram, the audio power amplifier is made from discrete components and is shown for interest only. The only reason this was done is because at the time of building/designing I had no LM386’s in the junk box. This discrete ampli- fier is not to be recommended as the LM386 is superior in every way and as such an alter- native circuit is also given. Old timers will probably recognise the discrete transformer coupled amplifier circuit (most 70’s pocket radios had something similar to this in them), I had the bits in the junk box so I used them. Airband Receiver Part 2: Squelch and Audio Circuits C1 100uF R3 10k R6 27k R7 27k C2 1uF C3 1uF C4 1uF VOLUME CTL RV4 10k LOG TO AF AUDIO AMP DC SUPPLY OUT TO AF AMP SQUELCHED AF OUT (RECORDING ETC) AF IN FROM IF STRIP R5 680R LED 1N4148 R4 3K3 TR4 BC108 R8 2K7 TR2 BC108 TR3 BC108 TR1 BC108 R2 27K RV3 47K SQUELCH CTL R1 15K RV2 10K SET ZERO RV1 47K METER SENSITIVITY M1 RSSI IN +12V + + + + AIRBAND RECEIVER SQUELCH CIRCUIT by BARRY M0DGQ CIRCUIT DRAWN BY G0EYO
Page 3
Page 3 May—June 2010 Airband Receiver Part 2: Squelch and Audio Circuits Power output is a few hundred milliwatts which is fine for most purposes. As can be seen, the LM386 amplifier is very simple and low component count. Audio enters via pin three and exits at speaker level from pin six, a Zobel network is included on the output, not much to say really! A more powerful amplifier chip could be used if so desired, however Tr3 in the squelch circuit would have to be changed to a power Darling- ton pair due to the increased current demand from the more powerful amplifier. CONSTRUCTION HINTS The radio is built in modular form as this al- lows each module to be built and tested indi- vidually. The RF board is probably the most difficult to construct and very much depends on what type of tuning capacitor you may have, my layout suites the capacitor I had at the time. A printed circuit board is recommended for this module. Keep all wiring/PCB tracks as short as possible; remember this is VHF and not so forgiving as HF regarding lead lengths etc. As far as mechanical construction goes that is very much up to the individual constructor. I used a drive cord (braided Dacron fishing line) tuning scale purely for simplicity, if you’re not bothered about absolute frequency readout then a reduction vernier would be okay, there are many possibilities. Photograph four gives a view of the drive cord arrangement used in this project and photograph five shows the scale lamps, I used five white high brightness LED’s running with less than the usual current flowing through them (these are running with 15 mA) as this greatly pro- longs their life. Epoxy glue was used to stick the LED’s in place. The optional RF preamplifier can also be seen on the RF board, built dead bug style next to L1. An old germanium transistor is used in this preamp (and it is a PNP type) as several were in the junk box, however a modern silicon transistor can also be used provided the base bias resistor is changed accordingly (see table in circuit diagram). The preamp is configured as a grounded base amplifier (or common base as it is also known). Housing all of the modules in a screened metal cabinet is recommended although a wooden cabinet lined with aluminium foil can be used. A suitable loudspeaker is mounted in the lid of the case. ALIGNMENT The RF and IF boards are the only modules requiring alignment. The following proce- dure assumes the squelch and IF boards are connected correctly together. Set Vr1 on the squelch board to 3/4 of its travel (i.e. it is about 10k). Next adjust Vr2 so the meter indicates 2 to 3 on the scale. Inject a 10.7MHz signal at 10mV pk-pk (unmodulated is fine) into the input of the IF board. Adjust IFT1 and 2 for maximum indication on the S-meter. If you exceed meter FSD then reduce signal generator amplitude and readjust Vr1. If you don’t have a signal generator then all is not lost; if the transformers came out of working sets or sets that have not been tweaked then they will not need much alignment and can be set up once the RF board has been adjusted (my transformers only needed an1/8 of a turn tweak). Also, I think the club has a signal generator that could be used. The alignment of the RF board does require a frequency counter capable of reading up to 150 MHz. Connect counter to Tr2 source. Adjust L3 to obtain a frequency range of 120.7 MHz to 146.7 MHz from end to end of tuning capacitor. The next step assumes RF module is con- nected to IF module correctly and rest of boards are connected and working cor- rectly. Set squelch so busy LED lights. Inject an AM modulated signal of 300uV @ 120 MHz into antenna socket. Tune into signal using tuning capacitor. When signal is heard adjust trimmer capacitors on C1 and C2 (assuming they are physically there) for maximum signal strength. Adjust T1 for maximum signal. Readjust IFT1 and 2 on IF board for maximum signal strength. Readjust trimmer capacitors on C1 and 2 for best band edge strength (high and low). If you do not have a signal generator, con- nect antenna to radio and tune for one of the many constant data channels present in the airband (start with one in the middle of the band if possible) and align as above. IN USE Once alignment is complete you will have a good airband receiver. As it is, sensitivity will be good for modulated signals of 3uV or better. If you are in a fringe area of the airport then you can add the optional RF preamplifier which will increase the sensi- tivity to 0.5 uV. If you are within 30 miles of an airport then you will hear sky born traffic easily without the need for the pre- amplifier but to hear the tower you will probably need the preamplifier unless you have a good antenna (all I have is 2m of wire poking out the back of the radio in my attic). You have to be quick when listening to pilots/atc as they only pass the informa- tion that is required at that time, messages tend to be very brief and much jargon is used; q&h and squawk are just some of the terms used but I am sure there are aviation experts in the club who can explain the various terms used. Barry M0DGQ SWITCHED 12V SUPPLY FROM SQUELCH CCT SPKR R9 10K R6 560R C5 2n2 C4 2n2 TR3 AC128 TR4 AC128 T2 LT700 RED C6 100uF R9 4R7 R8 150R R7 82R T1 LT44 BLUE TR2 BC108 R4 33K R5 10K R3 4K7 R1 56K R2 100K C2 2u2 C3 1uF TR1 BC108 C1 47uF + + + +FROM VOLUME CONTROL SLIDER AIRBAND RECEIVER AF AMPLIFIER CIRCUIT by BARRY M0DGQCIRCUIT DRAWN BY G0EYO 0V
Page 4
the hobby with some very funny stories, poems, limericks and jokes. There are too many people who take the hobby way too serious these days, not that this is a bad thing but sometimes it is better to look at the hobby from a humorous side too, and I think Jerry has got this balance just right. Once the reader gets past the Americanisms and the American/Canadian sense of hu- mour – we all find things funny in different ways in the many differing countries – it is a very funny book. I found it hard to put down, especially one night when I got in bed at 22:00 and started reading it, looking at the clock only to see it was almost mid- night and I had to be up for work at 05:30! Jerry starts the book off introducing himself, which as I said earlier is very similar history to me, and then leading with a story where I am sure we can all relate to about that elu- sive DXpedition and that starts the tone of the book off. We find jokes like; what do you call a CW operator equally good at sending with his left or right hand? AmbiDXterous (one which I had to read twice before getting the joke). There are takes on the Nursery Rhymes we knew as children; Little Bo Peep, Page 4 May—June 2010 Hogwash for Hamsters –by Jerry Spring VE6CNU A Book Review by Chris Colclough G1VDP When I was first asked by Ilkka to do this review, I thought “hmm, not really my thing but why not?” So I ordered the book from Trafford publishing and waited for it to arrive in the post. Having now read the book I can honestly recommend it. Jerry has a similar back- ground in the hobby to me, he took his test at a similar time to me, and through the fact of getting married and moving homes he put the hobby on a back burner for a similar period of time. So I thought maybe this guy is seeing the hobby from a similar angle to me. The book itself is a light hearted or hu- morous look at Has lost too much sleep, Chasing Dx until three, Too many nights, As she kept on the lights, Trying for DXCC. Jerry has also come up with his own Murphy’s Law for hams, a page full of true statements of “Remember When” which again most of the readers who have been licensed for more than 10 years will relate to. Adverts for equipment for sale, questions from the foundation exams written in Jerry’s own way and many other light hearted looks at the hobby. Would I recommend it? Yes, but it would be nice to be able to get the book from say the RSGB/ARRL book shops, rather than ordering and waiting as each book is printed to order so I am led to believe. Some of the stories and jokes will be heard at many of the conferences and meetings around the world, each being told by the orator in their own way. I know I certainly will be taking it with me to this years RSGB conference and will be quoting one or two of the stories and jokes in the bar – if you want to stop me just buy me a drink! Chris G1VDP http://www.trafford.com/Bookstore/ BookDetail.aspx?Book=188791 Wythall Club Member Wins Major RSGB Trophy One of Wythall Radio Club’s newer mem- bers has won one of the most prestigious trophies awarded by the RSGB. Dave Pick, G3YXM, was presented with the “Wortley-Talbot Trophy”, the largest of all RSGB trophies (first awarded in 1929 and annually thereafter for “Outstanding Experi- mental Work in Amateur Radio”) by RSGB President Dave Wilson, M0OBW, at the Society’s AGM in Bedford on April 17th 2010. Dave had been “on the fringes” of our club for some time but joined last year. He had originally come along so that his wife Jan could take part in the Foundation licence course of 2008 along with my wife Lynne. Thanks to Wythall RC Tutors, both girls passed their exams and since then, Dave has been a welcome visitor on several occasions, including at events such as VHF Field Day last year. Many of you will not know much about Dave, so perhaps it would be appro- priate to fill you in on a few biographical details. He has lived in King’s Heath for many years, spending most of his working life as a Senior Engineer at the BBC in Pebble Mill be- fore retiring a few years ago. He still works freelance however, and is often still to be found at the “Mailbox”, BBC Midlands’ new home. He also used to run the Ariel Radio Club at Pebble Mill and still holds the rather desirable callsign G2BBC, which he airs on sadly all-too- rare occasions! He may be better known to you as the writer of the bi-monthly LF column in RadCom but Dave also sits on the RSGB’s Technical Committee, mixing with some pretty august company, in- cluding some of the best known names and pio- neers of Ham Radio in the UK today. However, the award of the “Wortley-Talbot Trophy” was given, not for any of the above, but for a two-part article he wrote for RadCom last year on Remote Operation via the Internet. Dave has been a pioneer in the UK in this area. The first time I worked him on 160m a few years ago, he stunned me by giving me a signal report from Birmingham (guess what that was!!!) followed immediately by signing him- self GM3YXM and proceeding to give me an- other signal report from his remote Scottish station! To say I was confused would have been an understatement! The whole story of remote operation is per- haps a topic for a club talk, (if we can per- suade him to do so, as Dave is naturally a shy man) but in the meantime, enjoy the photos and if you want to congratulate him in person, he is a fan of real British ale! Dave’s Radio website is at www.wireless.org.uk Chris G0MLY/G7DDN
Page 5
Page 5 May—June 2010 Club Diary The club held its 25th Annual Radio Rally at Woodrush Sports Centre in March and it turned out to a great success. Lots of members, both young and old, turned up to help and even non- members turned up to help with the car parking after our usual “explorer scout” crew ended up on camp that weekend. No real issues, although at traders large dog did bite another trader, badly enough to require A&E treatment. Another trader decided to double to size of his stall without ref- erence to the rally organisers and he also left a lot of rubbish behind for us to clean up. His fee will increase next year. With a little gentle reminding the “No Smoking” signs were heeded. We put out chairs for visitors to have a rest on this year and this was appreciated. The rally attracted about 14 more paying custom- ers than last year and the club made an overall profit of about £1300. Members are asked to think about a wish list on what to spend the money. We have already decided to give the RSGB Spectrum Defence Fund £100, (we only got one donation of £1.50 in our bucket at the rally) 25th Annual Wythall Rally Great Success By the time you get this our six Foundation can- didates will be preparing for their examination on May 10th, we wish them well. Intermediate Course We are planning an Intermediate Course starting Saturday 29th May with nine sessions mostly on a Monday with the occasional Saturday and fin- ishing with the examination on 5th July Advanced Course Our next Advanced Course will start on Saturday September 4th with the exam on Monday 22nd November. This course will also be a mixture of Monday evenings and the occasional Saturdays. Schedules for the above courses are available from Chris G0EYO g0eyo@blueyonder.co.uk and we are actively seeking candidates for both of them Foundation Course If we can muster enough support we will run another Foundation course in 2010, starting Mon- day 19th July with the exam on the 16th of Au- gust. Training Report In January of this year the RSGB estab- lished a Spectrum Defence Fund to chal- lenge Ofcom as regards its interpretation of the various Acts and Directives that cover PLA/PLT and the threat they pose. For those unfamiliar with the problem, PLA/PLT is sending data around your house via mains wiring. The frequencies used cover the whole of HF and although their are supposed to be filters to null out the interference in the ham bands these are not always effective resulting in noise wiping out our favourite bands, The Fund will be ring fenced for use only in funding initiatives directly target at pro- tecting radio spectrum noise floor. At the appropriate time, this may well include legal action, but will also include appropri- ate representations to regulators, standards bodies and other organisations directly involved with the introduction of technolo- gies which pose a threat to the radio spec- trum noise floor. The club decided that it is all our interests, as radio hams, to help the RSGB fight this imposition and acquiescence by the regula- tory authorities, so the committee agreed unanimously to donate £100 to the fund. Wythall make a donation in support of the RSGB’s Spectrum Defence Fund Monday 3rd May Foundation Course session 6 Tuesday 4 th May 2m UKAC contest Saturday 8th May Foundation Course session 7 Sat-Sun 8-9th May Special Event Station VE day in Wythall Park GB4VE (Plug and Play) Monday 10th May Foundation Course Exam Tuesday 11th May Committee Meeting Tuesday 18th May Homebrew Tuesday 25th May Talk on Dams and Underground Tunnels by Vic Small- shire Saturday 29th May Intermediate Course session 1 Tuesday 1st June 2m UKAC contest Wednesay 2nd June Intermediate Course session 2 Monday 7th June Intermediate Course session 3 Tuesday 8th June Committee Meeting Monday 14th June Intermediate Course session 4 Tuesday 15th June Homebrew Saturday 19th June Intermediate Course session 5 Monday 21st June Intermediate Course session 6 Tuesday 22nd June talk to be advised Monday 28th June Intermediate Course session 7 Tuesday 29th June Intermediate Course session 8 Saturday 3rd July VHF NFD Sunday 4th July VHF NFD Monday 5th July Intermediate Course Exam Tuesday 6th July 2m UKAC contest Tuesday 13th July Committee Meeting Tuesday 20th July Homebrew
Page 6
Page 6 May—June 2010 The “TAKEAWAY TWO” Regenerative Receiver by Barry M0DGQ Here is a very simple receiver capable of re- solving CW, AM and SSB transmissions in the frequency range 1.5 MHz to 5 MHz also it is cheap to build. The set uses two transistors and is built on a wooden chassis lined with two takeaway curry tins (hence the title). This is a simple fun project which demonstrates what can be done with a couple of transistors, it is also quite nostalgic for me as some of my first built receivers were regenerative (mine used valves as transistors were quite expen- sive at the time and the valves came free, courtesy of duff television sets!). The circuit uses the old principle of regenera- tion (a very popular technique used in the early days of radio). In simple terms, an active device (transistor or valve) can ex- hibit gains of many thousands if positive feedback is applied to the circuit, i.e. if it is made to oscillate. Also high gain is achieved (not as high as the above) if the circuit is brought almost to oscillation. As can be seen in the photograph, the circuit is built on a PCB however veroboard or dead bug style will also work fine. The two tuning capacitors used are rather old but modern polycon types will be just as good in this project (G -qrp club sales). The radio drives small ear pipette type headphones (these can be purchased in most “pound” shops) to good volume from signals in the 10uV region so a good antenna is essential for this project (I used 30m of wire trailed in the house roof space). A slightly different circuit is also shown driv- ing a high impedance crystal ear- piece. Which one you use is up to you (subjectively I think the ear pip one just has the edge over the crystal earpiece circuit). A separate audio amplifier capable of speaker volume can be added if desired. CIRCUIT DESCRIPTION The circuit comprises of two sepa- rate stages; an RF preamplifier and the regenerative detector. Tr1 is the RF preamplifier, it provides a small amount of gain but more impor- tantly it isolates the antenna from the following stage; Tr2 the re- generative detector when used for CW and SSB reception has to oscillate at roughly one kilohertz away from the incoming receive frequency in order to demodulate the transmission. Without Tr1 stage this oscillation would be radiated by the antenna causing interference to other nearby re- ceivers. Tr1 is configured as a common base RF amplifier. The antenna signal via C3 is presented to VR1 (used as a crude RF attenuator) and then to the low imped- ance input of the preamplifier (Tr1 emitter) which gives a reasonable match. For simplic- ity this stage is untuned. Bias for Tr1 is pro- vided by R3 and R4. C4 decouples Tr1 base to ground at RF frequencies. L1a is the col- lector load for Tr1 and couples the amplified RF signal to L1c. L1a only has a few turns providing a good impedance match to Tr1 collector. C7, C8 and L1c form a parallel tuned circuit and it is this tuned circuit that provides the selectivity for the set. The tuned circuit is connected to the high input imped- ance of Tr2 gate 1 which presents very little loading to the tuned circuit thus maintaining its Q when the detector is not oscillating (AM reception). Tr2 is a dual gate mosfet and its gain/ positive feedback is controlled by varying its gate two DC voltage via R4 / Vr1. LED 1gives a greater gain range by allowing Tr2 gate 2 voltage to go negative with respect to its source if required. Feed- back or regeneration for this stage is achieved by a small coupling winding L1b which is lightly coupled to L1c (L1a, b and c are all wound on the same former); ampli- fied RF signals are present on Tr2 drain, a small proportion of this signal is fed to L1b via C10. L1b winding is arranged such that the fed – back signal passing through L1b is IN phase with the signal in L1c, thus these two signals are thus added, creating a larger
Page 7
Page 7 May—June 2010 amplitude signal. This loop continues until a point is reached where Tr1 will be freely os- cillating. It is this oscillation that gives the stage an extremely high gain; a not quite so high gain will also be achieved if the stage is brought just to the edge of oscillation. An- other effect of feedback or regeneration is that the Q exhibited by L1c will be hundreds of times greater than normal thus giving a much greater selectivity, as a point of interest this is how Q multipliers work. As Tr2 is operating in a non linear mode, demodulation of the signal will also occur in this stage (hence the term regenerative detec- tor). The drain load for Tr2 is an interstage audio transformer type LT44; it has a primary impedance of 20 Kohm and a secondary im- pedance of 1 Kohm. As far as RF is concerned the primary is acting as a high value RF choke due to its large inductance and is the drain load for Tr2, so no RF will pass through the transformer, AUDIO frequencies however will and do pass freely via the transformer to the secondary winding. So, audio is present at the secondary of T1 at a source impedance of very roughly 500 Ohms. This source imped- ance is not low enough to drive the low im- pedance headphones (40 ohms or so) to a useable level; a further impedance transforma- tion is needed. Audio from T1 is fed to Tr1 base via c11.Tr1 base is at RF ground due to C4 (a 22nF) but at audio frequencies its input impedance is high, so we can feed audio in to the base and re- trieve from the emitter at a very low source impedance suitable for driving the head- phones, in effect, as far as audio is concerned Tr1 is an emitter follower (a buffer) stage. Thus Tr1 is doing two tasks; amplifying RF and at the same time providing audio power gain. RFC1 and C1 prevent RF from reach- ing the headphones which would otherwise severely attenuate the incoming RF signal. C2 provides DC blocking so Tr1 can oper- ate correctly. C11 also provides DC block- ing to maintain Tr1’s base potential. If an audio power amplifier is to be used, take C11 to amplifier instead of base of Tr1. ALTERNATE CRYSTAL EARPIECE CIRCUIT The crystal earpiece circuit is slightly dif- ferent in operation. Here, we are driving a high impedance load (a crystal earpiece exhibits several megohms impedance), so Tr1 needs to produce voltage gain at audio frequencies. Looking at the circuit, audio is applied to Tr1 base as before but the ear- piece is connected across R3. At audio frequencies the combination of the earpiece and the 4.7 kohm resistor make up the col- lector load. RFC2 blocks any RF that would otherwise pass through the earpiece’s flex, this is done to maintain stability when re- gen is in use. So, at RF all Tr1 sees as a collector load is L1a in parallel with R3. The impedance presented by L1a is much lower than R3, so realistically all Tr1 sees is L1a. C7 is included to present an open circuit (ish) to audio frequen- cies, without it the earpiece would be shorted out via L1a, but it maintains an RF path for L1 due to it’s low capacitive reactance at RF (effectively it is a short circuit at RF). Tr1’s emitter is connected to ground at audio frequencies via RFC1 andC2, thus providing voltage gain (not power gain as in the previous circuit) at audio frequencies. The AF voltage gain of the stage will be roughly R3 divided by the emitter im- pedance (the capacitive reac- tance of C2 @ 1 KHz in series with internal emitter resistance of about 25 Ohms). IN USE If you find you can not get your set to oscil- late (you will hear a faint “rushing” sound or squealing in the headphones when oscil- lating), reverse the connections of L1b or L1c. You may notice there are two variable tun- ing capacitors. The larger one (500 pF) is used as a band set control and the other (50pF) is used as a bandspread (fine tune) control. When the set is used for SSB/CW (i.e. it is oscillating) tuning will be very sharp and practice will be required, large control knobs are recommended for the tuning controls. The ones used here are made from a bleach bottle top and an aerosol can top, these were filled with finishing plaster to give a “weighty” feel. The RF attenuator VR1 is useful when receiving very strong signals, without it blocking can occur (the set goes into complete silence). For reception of AM signals the regen control should just be on the brink of oscillation. For CW reception strong oscillation should be used but less for SSB. A good aerial must be used. An earth may be beneficial to some; in my case it made recep- tion worse as broadcast stations tended to swamp the amateur stations. This receiver is not intended for any serious radio work, but it does give an insight to what can be achieved with a few components and most of all it is a fun project, CW stations will be heard with ease and SSB stations will also be resolved once tuned in correctly (this does take prac- tice). Many broadcast stations can be heard (international ones too). COMPONENTS The coil L1 was wound using 32 SWG enam- elled copper wire. The former is 21mm OD plastic overflow pipe.L1c is 35 turns close wound. L1b is 8 turns next to ground end of L1c. L1a is 7 turns wound over L1c ground end (see photograph). If polycon capacitors used; L1c should be 40 turns and both gangs of polycon capacitor should be wired in parallel for bandset capaci- tor (tuning range will be slightly reduced). Headphones; use ear pipette type and wire both half’s in series to obtain 40 ohms. A metal chassis/ curry tin should be used for the construction of the set to eliminate hand capacity effects. Tr1 BC108 Tr2 BF981, BF966 etc. RFC1 22mH or greater T1 LT44 push pull amp transformer (the blue one) LED 1 standard red or green LED C7 500pF variable capacitor C8 50pF variable capacitor C1 1nF C2 10uF C3 10nF C4 22nF C5 100uF C6 100nF C9 10nF C10 390pF C11 220nF C12 100nF C13 10nF R1 150K R2 150K R3 47K R4 330 Ohm R5 1K VR1 2K2 Lin pot VR21 47K Lin pot Barry M0DGQ
Page 8
Contest Group Report Summer is on the way, and so are a number of portable events for you to get involved with. The Backpackers contests are a gentle way into radio-sport. On several weekends throughout the summer, short 4 hour events will be run. Simple stations set up on hilltops, picnic areas and safe roadside areas will be used to make QSOs up and down the country, and into mainland Europe. In the past several Wythall teams have been on the air, adding a bit of club rivalry to the competition. Old FT290’s, newer FT817’s, or anything that’s portable and low powered could be used on 2 metres. For the bigger events, VHF NFD is only a few months away. At this point it’s likely we’ll have a similar Low Power event to last year, which seemed a reasonable mix of fun and activity for the club, and gave us a reasonable placing too. If you have any ideas, please speak up at the next committee meeting. On the HF side, there are still plenty of world- wide DX events each weekend. Special Contest Callsigns for Individuals Until now, all UK Special Contest Callsigns were Notices of Variation to club callsigns. Their use has been in multi-op entries by these clubs, and also in single-op events where a member of the club or society uses the call. Some of the clubs’ with an SCC have a small membership, perhaps with only one or two contesters amongst them. Some of these SCC’s have hence become synonymous with individuals, although they were not officially ‘personal’ SCCs. All this has now changed. Any UK amateur that so wishes will now be able to apply for their own SCC. Of course, it’s not quite as simple as we would hope, although there are some reasons behind this. There are 520 pos- sible combinations of SCC’s in total, given that there are 2 x prefix letters G and M, 10 digits, and 26 suffix letters. 2 x 10 x 26 = 520. At least 130 are already allocated to clubs and contest groups. Ofcom assumed that there could be a high demand for individual SCCs, which could exhaust the available supply of callsigns, but also present too much demand on the Ofcom staff to process the requests. Hence qualification criteria have been an- nounced with the intent to reduce the amount of callsigns issued that are not used. Evidence of participation in several contests is now required, although this should not be a bar- rier to anyone serious about qualifying, even with a modest station. If you are interested in obtaining your own personal SCC for use in the above contests, go to the Ofcom website here to read more Editor: Chris Pettitt G0EYO, 23 Dark Lane, Hollywood, Birmingham, B47 5BS. Phone: 07710 412 819, E-mail: g0eyo@blueyonder.co.uk Page 8 May—June 2010 The next issue of the Wythall Radio Club Newsletter will be published at the beginning of July 2010 and then download the application form: http:// www.ofcom.org.uk/ radiocomms/ifi/ licensing/classes/ amateur/special_call2 M0XXT WPX SSB Contest 2010 The Versatower was loaned out to the M0XXT Dorridge Scout Group for the WPX SSB Contest at the end of March. A large antenna array was put together. At the top of the head unit, near 100 feet, there was a commercial A3S 3 element HF triband yagi, covering 10m, 15m and 20m. On top of this was a full size 40m 2 ele- ment yagi, which was constructed of fibreglass fishing poles. A further 20 or so feet above that was a pair of 80m di- poles. These were held in a thrust bearing which allowed the dipole cen- tres to remain fixed, whilst the tower rotated beneath it. The 5 operators, including a visiting Ca- nadian amateur, made over 3300 QSOs in 48 hours of operating in the Multi-2 cate- gory. This enables 2 stations to transmit at once, although this requires some signifi- cant engineer in terms of band-pass filter- ing to keep the RF from one radio away from the other radio. See more photos at http:// www.m0xxt.co.uk Lee G0MTN 1 May. 1400-2200 432MHz Trophy Contest 1 May. 1400-2200 10GHz Trophy Contest 1-2 May. 1400-1400 432MHz-248GHz Contest 9 May. 0900-1200 70MHz Contest CW 15-16 May. 1400-1400 144MHz May Contest 16 May. 1100-1500 1st 144MHz Backpackers 23 May. 1400-1600 70MHz Cumulatives #3 13 Jun. 0900-1300 2nd 144MHz Backpackers 19-20 Jun. 1400-1400 50MHz Trophy Contest 20 Jun. 1000-1400 50MHz Backpackers 27 Jun. 1400-1600 70MHz Cumulatives #4 Date Time (UTC) Contest Name. Dates - Mode - Frequency - Exchange May 1900-2030. 80m Club Championships 3rd – SSB; 12th – Data; 20th – CW June 1900-2030. 80m Club Championships 7th – Data; 16th – CW; 24th – SSB June 5/6 1500-1500. National Field Day 1.8-28MHz, RST+Serial Contest Calendars

RSGB News