2012-05 WRC Newsletter

PDF Version

Page 1

Wythall Radio Club meets from 8pm every Tuesday evening at Wythall House, Wythall Park, Silver Street, Wythall, B47 6LZ, near Birmingham. Visitors are very welcome. Wythall Radio Club is affiliated to the Radio Society of Great Britain g0eyo@blueyonder.co.uk http://www.wythallradioclub.co.uk Wythall Rally– A Big Success! With the support and help over the weekend from most of the club member- ship, the 27th Wythall Rally was the best ever with over 500 paying visitors and profits up 50% upon last year. We benefitted from selling equipment donated by Frank G3MZU’s (now SK) estate. Again we were supported by major traders, Radioworld, Westlake, Sandpiper, JAB Electronics and other compo- nent suppliers. We also had a large number of traders selling used equipment which went down well with our customers. In the end 36 traders booked space with us and they seemed to have had a good day. The queues started to form well before the 10am opening time and by 10am they were the long- est we had ever seen. The scouts did a fantastic job looking after the parking and we managed to park everyone who came on site. The bring and buy didn’t do so well from visiting customers but was very much appreciated by club mem- bers who were able to sell their stuff for free. We also had ,for the first time ever, our own club stand where we sold the club surplus equipment and components. We also had a new caterer this year whose Army style chuck wagon proved as big a success as his burgers, bacon and pork baps. He had a good day and will be back next year. This was the first year where we had no-one in overall charge of the rally day. Individual club members looked after their own areas of responsibility and worked well together when a collective judgement was required. The club has now invested its earnings in providing broadband interconnection in the shack and we will be looking at spending some money on new flooring and storage facilities. We may even look at replacing one or two of our rigs. As summer approaches we will be looking at attending sev- eral special event weekends. The Easter Gathering at Hanbury proved especially successful this year with members despite less than perfect weather and we have Mills on Air to look forward to in May as well as a Plug and Play weekend at the end of May. In June, we hope to put on a Jubilee SES and a station at the Transport Museum at Wythall, and at Wythall Carnival in August. Talks from visiting lecturers have become a regular monthly feature and these have proved very popular with the members. Finally the Friday social eve- nings have become a regular feature of the club’s calendar and are very well supported by members who come from a drink and some nibbles and a play on the radio. Well done Wythall Radio Club, proving that you really can “Have fun with RF” Chris G0EYO

TALKS

May 2012 15th “Instant Morse” Interactive Morse Demo by Steve White G3ZVW

June 2012 256th “My World of VHF” by Tim Kirby G4VXE

Other talks "in the pipeline" this year include a visit from Mark G4FPH to talk about VNA (Vector Network Analysis - I don't know what it means ei- ther!) and 2E0SDR giving a talk on Software Defined Radio. Dates are in the diary

SPECIAL EVENT STATIONS

12/13th May“Mills on Air” Avoncroft Museum, Bromsgrove

26/27th May “Plug and Play” weekend in Wythall Park

June 4th Diamond Jubilee station at Wythall Park

June 16th/17th International Museums weekend at Wythall Transport Museum

MAKE A NOTE IN YOUR DIARIES FOR THESE EVENTS

Remember the Lew Wil- liams CW Shield event runs through out May. You can get details from the Files section on the G4WAC Ya- hoo group Newsletter May—June 2012

Page 2

A replacement restored audio of quite good quality for such a small speaker.

One down, one to go.

I pounced straight on the paper caps - again they were leaky, but not as bad as the other set. Replacing these restored correct volt- ages on the electrodes but no signals. Could it be… that pesky 22K resistor? Oh yes it was- not quite open circuit but measuring 490k. In went another compo- nent of suitable vintage and the set burst into life. Not quite as good audio as the first and a continuous low level “tone” marred the demodulated audio.

So a little bit more to do should time permit.

These sets are compact but the down side is access to the valve holders is difficult and may well require temporary removal of some components whilst work is in progress.

The Americans were manufacturing similar ranges of battery radios using lightweight cases which were oblong in shape and made of plastic. They were not as durable and in- deed common complaints were that the hinged lids distorted or twisted. Access to the electronics was equally difficult but they did not suffer the same problems with component deterioration as the Marconi which is a bless- ing. The American manufacturers generally used series strung heaters with a 6v battery for LT and either 67.5v or 90v for HT.

At the same time as these all valve sets were being made, the Americans were experiment- ing with “hybrid” radios, part valve, part tran- sistor and of course once they had transistors working reliably in the rf/if circuits…the rest is history.

Ian M0IDR

Page 2 May—June 2012

The chassis used very long but thin waxed paper capacitors which were apt to fall apart or go very leaky.

Hooking them up to my trusty 67.5 v and 1.4v supply I was rewarded with absolutely nothing by way of signals from either radio although the earlier one (by serial number) did produce faint crackles when the set was turned on/off by the lid operated switch.

The audio output valve a N17 had an open circuit filament so before fitting a replace- ment it seemed appropriate to recall that these battery valves do not have separate cathodes, the heater doubles as the cathode and therefore the heater has to cope with any current the valve passes together with its own filament current.

I suspected therefore that the filament had been stressed by the valve passing exces- sive current and there is a common theme forming here- leaky capacitors. With the valve left out, the voltages at the electrodes were measured and sure enough a hefty +ve 6v at the control grid. No wonder it threw in the towel.

A further check or two revealed more +ve voltages where they should have been negative and so the associated coupling capacitors were changed by Philips “mustard” types, very reliable they are too.

The audio output stage was now very lively responding well to the touch of a screw- driver blade but still no signals. The oscillator coil looked rather “mouldy” for want of a better expression but did prove to be innocent; lack of results was down to the grid 2 resistor (22k) to the fre- quency changer being open circuit.

A NOS resistor to match the others in the chassis brought forth absolutely nothing! The single diode detector and audio amplifier valve was deprived of its anode voltage by a very sorry looking 470k resistor being open circuit. Described in the sales literature as “All-Dry” Personal Portable, they were clearly house trained and boasted a two waveband 4 valve superhet in a casket shaped die cast box with spring loaded lid and hinged base.

Weighing in at 4lbs inclusive of combined HT and LT battery, the radio measured 6 ¾ x 4 ¾ x 3 ½ in imperial units.

Two examples were liberated from Frank’s loft recently and were given the once over on the work bench. There were marked differences in the com- ponent layout between the two, the most notable being the placement of the audio output grid bias electrolytic and bypass re- sistor. These components were moved from by the audio output transformer to the under chassis where they took up a lot of space and made component replacement much harder to achieve. A Tale of Two Marconi P20b portable valve radios

Page 3

Page 3 May—June 2012 Well I’ve been putting off this pro- ject for years, due to the size of it but I finally bit the bullet, and with the help of Don G0NES and Glenn G8NOF, project “antenna rebuild” began. Firstly we needed a safe working area, so Don’s scaffold was installed and secured to the tower (thanks Don). Next was the removal of the old antenna’s, 4m,6m,70cm,2m, so cables cut (monster opening predicted at this point) and one by one the antenna’s were removed.

The metalwork was cleaned and checked, and a new heavy duty rotator and bearing were installed. Then 70cm beam and 70MHz beams mounted, as quickly as pos- sible before the neighbours noticed they had all disappeared! The 2m monster beam was then built and installed, getting the support ropes right was a job on it’s own! Finally assembly of the 6m beast and instal- lation and boy that was awkward to get up on the roof!!

Four days into the project now, and still off air. Next up was the removal of the old cable looms, and cutting and strapping the new cables which were four lengths of 25m westflex 103 and control cables for the mast- head pre -amps and rotator. The ca- bles were then terminated, antenna tails taped to mast with (hopefully) enough for rotator loop. Pre -amps and wiring loom connected, loom then fed over pergola, fixed to wall and finally fed into shack and termi- nated.

At last we could now con- nect the analyser and test SWR etc. Cable loss was also tested and came in as predicted (low). Radio connected and beacon hunting started. At this point we discovered the 70cm pre -amp was not working, so removal and trip to Barry’s. next day (thanks Barry) repaired preamp re -installed. Fi- nally all antennas were fine-tuned on the SWR (1.5 or lower were ob- tained on all four).

Bingo we are in business! Scaffolding was then then disassembled and removed. Now the mast could be raised to check for any cabling issues and rotation prob- lems. None found! Great! All radio’s connected up and on -air tested. G4VPD VHF Mast Re-build No problems. The whole project took over a week to complete, and the weather was bril- liant which helped immensely! On -air per- formance appears as per manufacturers speci- fications (InnovAntenna). Lots of forward gain with next to NO side lobes, and up to 40db front2back rejection!! (depending on antenna) WOW

Was it worth it ??? YOU BET !

Almost no band noise on all 4 bands com- pared to the old installation (which was a good setup anyway). The bands were quiet for a few weeks after installation but then the rewards came, 1170km qso on 2m, and regu- lar stations worked into Europe in the UKAC contests. Mid France worked and lots more countries heard on 70cms.

Holland worked (tropo) on 4m (new country) and more stations worked again in the UKAC contests, with the final session of 2011 reap- ing results to finish 3 rd place for the year, and finally 6m, worked four stations on TEP/F2 into central Africa. Great, as it was almost only open to Africa from the south coast of the UK, so the low noise and high gain paid dividends to enable contacts from the Mid- lands.

Plenty of winter E’s worked also, and I am now waiting for the Spring openings (fingers crossed) via TEP/F2 to south Africa and Asia, and of course the sunspot maximum F2 open- ings worldwide (we hope!)

1st place Feb 2012 UKAC session – a first for me! I am hoping It can only get better!

Mike G4VPD

Antennas are from www.innovantennas.com One removed and three to go 17 el 432MHz and 5 el 70MHz New rotator and bearing fitted then 432/70MHz fitted on mast 13 el 2m beam built Final installation

Page 4

880pF capacitor in the Pi network to a 1200pF and increasing TR3 standing current to 800mA. However, I do not recommend this unless you fit a large heat sink to TR3 as it does run very hot at this power level. The receiving station is unlikely to hear any difference between 6 and 10 Watts Tx power, I run mine at 6 Watts for a total current drain of 750 mA, if you re- quire 5 Watts exactly, reduce Tr3 bias voltage accordingly.

Alignment of the fin- ished transmitter is simple, with no drive set the standing current of TR3 to 200 - 250 mA. Apply drive and adjust VC1 for maxi- mum output power. Adjust the xtal trimmers for exact xtal frequen- cies, these trimmers were only included in case several of these transmitters are built for use in a net and all pro- duce the same TX fre- quency. You may note an extra transistor on the circuit board, this is used as contact closure Page 4 May—June 2012 40m QRP The G-QRP Club sells a good range of 40M CW xtals at a very reasonable price. Here is a very cheap and easy to build transmitter using these xtals. Power output is approxi- mately 6 Watts for a supply voltage of 13.8 VDC ( if you experiment with the Pi output values and FET bias then over 10 Watts can be had, but a large heat sink will be required for the FET ). Construction is made easy by using a pad cutting tool for the circuit board - this tool is also available from the G-QRP Club. Easy to obtain components are used throughout the design.

The circuit consists of a Colpitts xtal oscilla- tor TR1 followed by a diode switch D1, D2 , a driver TR2 and PA stage TR3. A zener diode ZD1 stabilises the DC supply to TR1 stage, this oscillator runs continu- ously to avoid any chirp etc. The oscillator output is keyed by a diode switch consisting of D1, D2 and their associated components. Capacitor C1 provides some envelope shap- ing of the keyed waveform, it is isolated from RF by L1. On key down C1 gradually charges up towards the supply rail via D4 and R1, thus D1 and D2 become forward biased allowing the oscillator signal to pass to TR2 without a steep rising edge of the waveform. On key up, C1 discharged via R1, R2 the time constant of which elimi- nates a sharp falling edge of the waveform.

Tr2 is biased to class B via D3. It's collector load consists of L2, VC1, a parallel resonant tuned circuit. A low impedance tap on L2 feeds TR3 gate. The gate is heavily swamped by low impedance bias network and L2 tap, this is to overcome the 150Pf or so of gate capacitance that would otherwise be difficult to drive. TR3 is biased for a standing current of 200 - 250mA by VR1. The drain load for TR3 is a Pi network, the 80pF ( approx ) of output capacitance exhib- ited by TR3 is taken into account for the network component values.

A low pass filter ( L5 and L6 ) follows the Pi network. A two pole two way switch is used for antenna switching, DC supply to the transmitter and also a mute voltage for a RX IF. A matching RX is currently under construction for use with this TX.

As mentioned earlier, it is possible to obtain 10 Watts output simply by changing the to ground key switch so my electronic keyer can be used with this set.

The front and back of the case is made from some copper clad board, the circuit board

Page 5

Page 5 May—June 2012 forms the bottom of the case. The lid of the case is made from a perforated aluminium ceiling tile.

Barry Zarucki M0DGQ

40m QRP Transmitter cont’d

ANT +13.8V 0V To RX Set Bias send receive M0DGQ 10n 100n 100n 8V2 10K 60pF 47nF 820R 220R 12R 4 X G-QRP club 40M xtals 27K 27K 150R 220pF 220pF Tr1 Tr2 Tr3 L2 ZD1 VR1 VC1 g s d 60pF60pF60pF60pF Tr1 2N3904 Tr2 2N3904 Tr3 IRF510 L2 = 36t, 6t tap from Cold end 32 swg enamelled Cu on T50 - 2 core KEY 1K 6K86K8 2K2 2K21uF 330uH 100n 470R 1K 10n 10n RX IF mute 100n 330R Diodes = 1N4148 D1 D2 R1 L1 C1 D3 L3 L4 L5 L6 L4 = 11t, 22 swg Enamelled Cu On T50 – 2 core L3 = 40t, 32 swg Enamelled Cu On FT50 - 43 Ferrite core 6V8 560R47nF L5, L6 = 14t, 22 swg Enamelled Cu On T50 – 2 Core 880pF 1nF 470pF 4K7 D4 R2 Mills on the Air Sat 12th May at Avoncroft Museum, Nr Bromsgrove GB1DGW HF QRO and VHF Come and Join us 10:30am – 5pm (earlier to set up)

Page 6

Page 6 May—June 2012 Hanbury Fair –GB4HEG Are you coming to Hanbury fair? Steam and vehicles from a long ago time. Remember the snow a few years back was there. We hoped for better weather this time.

Tell helpers to make sure a waterproof coat. It's going to rain, so an umbrella as well. If it's as bad as they forecast, you might need a boat But sun is a maybe some forecasters tell

Les turned up with an instant pitch tent. It erects in seconds was what he was told. And before too much time was spent . There was a dwelling all guyed down and bold.

Then up went the mast with the usual flair. Lots of helpers were gathered around "We're bloody useless" someone did declare. As once more the antenna was laid on the ground.

Then came the awning, the shelter for all. We'd found that a mouse had made this his home For we saw a hole gnawed into a wall. We were happy to learn that this creature had gone.

But soon the station was loud on the air. A line up of wireless some old and some new . The signals were booming from Hanbury fair. This is when we're most proud of this thing that we do.

The forecast was wrong with the suggestion of sun. The wind soon picked up and brought with it the rain. But despite the weather we all had some fun And we all look forward to return- ing again

So thank you to all who gave your support. The station can't happen if you don't give your time I'm ever so happy, so to write this report I've decided to revert to the past days of rhyme.

Darren GW7HOC/MW5HOC (Official WRC Bard) Photos: above GB4HEG QSL card; top right, Les M0COK: Howard M6AUL and Phil 2E0WTH doing something useful for a change; Jon M0JMM doing God knows what and a steam tractor

Page 7

Page 7 May—June 2012 Easter Contest 2012—Results An excellent turnout for the second Wythall RC Easter Con- test, beating all records set in the first year.

45 stations were active during the contest, of which 24 sent in logs. It is worth repeating that in this contest as indeed in any RSGB or other event, it is always worth sending in your log, for the small amount of effort and time it takes to do so. It helps the adjudicators a lot!

5 stations (astonishingly for just 5 days activity!) managed over 100 QSOs with other members. Not surprisingly, they all found themselves in the leading positions. 20 multipliers won the contest last year – this year, only the bottom three entrants didn’t get at least 20 multipliers! Amazing!

Competition was much fiercer in the 2m FM only section and had one or two of those decided to enter the ALL sec- tion, the results would have looked different. Food for thought for 2013 maybe?

Congratulations to all winners and thanks to everyone for taking part and making it such great fun! What will you all do between now and December 24th? J Congratulations to winners Stuart M0NYP, Jim 2E0BLP and Ian M0IDR (great result from Evesham!) A special well done also to Anita M6DUO, the highest placed Foundation Licensee in her first ever contest! Congratulations to Mike G4VPD, Chris G7DDN and Colin M0GJM

Chris G7DDN obo Contest Committee Section 2FM

POS CALL QSOs BEST MLTS PTS 1 M0NYP* 122 86 41 3526 2 2E0BLP* 120 81 40 3240 3 M0IDR* 102 70 37 2590 4 G1VLT 97 64 35 2240 5 M6DUO* 80 63 34 2142 6 M5DUO 68 52 31 1612 7 M0JMM 57 52 25 1300 8 2E0SDD 46 42 28 1176 9 M6AUL 42 42 27 1134 10 M0DGQ 56 43 25 1075 11 M6FAB 49 42 24 1008 12 M6STJ 37 37 26 962 13 G0NES 50 38 22 836 14 M1JSS 41 35 23 805 15 G0MTN 25 25 19 475 16 M0AEJ 33 27 16 432 17 M3SSP 7 7 7 49

Section ALL

POS CALL QSOs BEST MLTS PTS 1 G4VPD* 101 76 42 3192 2 G7DDN* 103 74 39 2886 3 M0GJM* 88 67 37 2479 4 G0ICJ 71 59 31 1829 5 G0EYO 59 59 29 1711 6 M0RKX 40 40 28 1120 7 M0MCX 31 31 23 713

Composite Table

POS CALL QSOs BEST MLTS PTS 1 M0NYP* 122 86 41 3526 2 2E0BLP* 120 81 40 3240 3 G4VPD* 101 76 42 3192 4 G7DDN* 103 74 39 2886 5 M0IDR* 102 70 37 2590 6 M0GJM* 88 67 37 2479 7 G1VLT 97 64 35 2240 8 M6DUO* 80 63 34 2142 9 G0ICJ 71 59 31 1829 10 G0EYO 59 59 29 1711 11 M5DUO 68 52 31 1612 12 M0JMM 57 52 25 1300 13 2E0SDD 46 42 28 1176 14 M6AUL 42 42 27 1134 15 M0RKX 40 40 28 1120 16 M0DGQ 56 43 25 1075 17 M6FAB 49 42 24 1008 18 M6STJ 37 37 26 962 19 G0NES 50 38 22 836 20 M1JSS 41 35 23 805 21 M0MCX 31 31 23 713 22 G0MTN 25 25 19 475 23 M0AEJ 33 27 16 432 24 M3SSP 7 7 7 49

* denotes Certificate and/or Egg Winners.. Winners FM Section: top to bottom: Stew M0NYP—1st; Jim 2E0BLP—2nd; Ian M0IDR—3rd; Top Founda- tion Anita M6DUO L:Chris G7DDN presents Mike G4VPD with 1st place in All Section R; Mike G4VPD pre- sents Chris G7DDN with 2nd place in All Section L; Mike G4VPD pre- sents Colin M0GJM with 3rd place in All Section Callsigns logged other than those who entered above included… 2E0WTH, 2E0XTV, G0HDF, G0HPH, G1MJO, G3YXM, G4TVR, G4WAC, G6ZDQ, G7OKF, G8EOJ, GB4HEG, GW7HOC, M0COK, M0COP, M0GRO, M0TVU, M0URX, M3PMP, MW3YKL, MW6YDP

Page 8

Contest Corner

Editor: Chris Pettitt G0EYO, 23 Dark Lane, Hollywood, Birmingham, B47 5BS. Phone: 07710 412 819, E-mail: g0eyo@blueyonder.co.uk Page 8 May—June 2012 The next issue of the Wythall Radio Club Newsletter will be published at the beginning of July 2012 Kempton Rally

Remember that during the month of May you can enter the contest for the Lew Williams Shield using your CW skills. This is not so much an contest but an event to award the member who the contest committee decide has made good progress in developing their CW skills. The rules are on the Yahoo G4WAC website so why not have a go. There are plenty of CW opportunities during the month not least our own special event station at Mills on Air and the Plug and Play week- end. So have a go Chris G7DDN organised a car load to visit Kempton Rally in April and came across new members Dave G7IBOand Juliet M6RSC wandering around. Everyone seemed to have had a good time. Haven’t heard of any new rigs though! Training The club started an Intermediate Course in April with two club memebrs, Chris M6BNQ, Keith M6KAO and non-member Tony M6KST who took his foundation course at Solihull club. Their examination is scheduled for the 18th June and we wish them well. My thanks to tutors, Barry M0DGQ, Peter G4LWF, Dave G3YXM, David G0ICJ, for helping us run these courses. And to David G0ICJ and Mike G4VPD who invigilate them. Without the support of these guys we would not be able to run these courses. Tara ( daughter of Paul M0PYT- right) re-took her Foundation exam on April 22nd and passed with a very good mark (22/25). Her new callsign is.M6GAL Lets hope we get the chance to have some QSOs in the very near future. We have organised a re-take of the Founda- tion exam for Jake (grandson of Peter G0HPH) for May 9th and fingers crossed he gets his ticket shortly. We could run another Foundation course between mid June and September when our Advanced course starts in preparation for the December examination. If you know of anyone looking for a Foundation course then please let Chris G0EYO know. Some of you may know that I also act as a Tutor for the Bath Dis- tance Advanced Learning programme run by Steve Hartley G0FUW. I am pleased to say that Steve and the tutors were awarded the RSGB Kenwood Trophy at the RSGB AGM held in April. I could go to the award ceremony as it clashed with the Intermediate class but I am told a certificate is on its way. Chris G0EYO Training Coordinator Four go off to Kempton; l-r Barry M0DGQ, Ian M0IDR, Dave G3YXN, Chris G7DDN Lew Williams Shield 80M CC 6M UKAC 4M UKAC 2M UKAC 70cm UKAC 19/42 17/73 13/25 17/73 23/50 DATE START (local) LENGTH 01-May 8pm 2.5 HRS 05-May 3pm 8 HRS 5+6 May 3pm 24 HRS 08-May 8pm 2.5 HRS 19-May 3pm 24 HRS 20-May 12 4 HRS 22-May 8pm 2.5 HS 27-May 11am 2 HRS 29-May 8pm 2.5 HRS 05-Jun 8pm 2.5 HRS 10-Jun 12 4 HRS 12-Jun 8pm 2.5 HRS 16+17 Jun 3pm 24 HRS 24-Jun 11am 2 HRS 26-Jun 8pm 2.5 HRS DATE START (local) LENGTH 07-May 8pm 1.5 HRS 16-May 8pm 1.5 HRS 24-May 8pm 1.5 HRS 2+3 Jun 4pm 24 HRS 04-Jun 8pm 1.5 HRS 13-Jun 8pm 1.5 HRS 21-Jun 8pm 1.5 HRS 02-Jul 8pm 1.5 HRS 11-Jul 8pm 1.5 HRS 19-Jul 8pm 1.5 HRS 28+29 Jul 1pm 24 HRS 70cm TROPHY 70cm - 248Ghz Contest 144Mhz MAY Contest CLUB STANDINGS UPCOMING VHF CONTESTS TYPE 2M UKAC 70cm UKAC 80M CC CW 1st 2M BACKPACKERS UPCOMING HF CONTESTS TYPE 80M CC SSB 80M CC DAA 2M UKAC 2nd 2M BACKPACKERS 70cm UKAC 6M TROPHY 4M CUMLATIVE #4 6M UKC 6M UKAC 4M CUMULATIVE #3 4M UKAC 80M CC CW HF NFD 80M CC DATA 80M CC CW 80M CC SSB 80M CC SSB 80M CC DATA IOTA