2014 Mar-Apr WRC Newsletter

PDF Version

Page 1

Wythall Radio Club meets from 8pm every Tuesday evening at Wythall House, Wythall Park, Silver Street, Wythall, B47 6LZ, near Birmingham. Visitors are very welcome. Wythall Radio Club is affiliated to the Radio Society of Great Britain. Contact g0eyo@blueyonder.co.uk Wythall Rally our 29th one! Fantastic weather has helped to make this year’s Wythall Radio Rally an unqualified success! Traders began arriving in glorious sunshine from 0700 this morning and, helped by the enthusiastic members of Wythall Radio Club, it wasn’t too long before all the stalls were ready. Bacon Rolls from our caterer helped the morning go quickly and before long it was 1000 and opening time!

Traders were seen making brisk deals, visitors were caught between the many offerings on display and wanting to stop to catch up and chat with old friends – and despite our inability to use the school playing fields for our car park, the vast majority of visitors were very understanding and helped make today’s event the undoubted success that it was.

Thank you one and all, traders, visitors & hard work- ing Wythall Radio Club members – we cannot do it without you!

Chris G7DDN newsletter wythall radio club “having fun with rf” wythall contest group

www.wythallradioclub.co.uk facebook.com/wythallradioclub www.wythallradioclub.co.uk Mar– Apr 2014

Page 2

through our regular con- tacts we know Jake G1YFF over in Cam- bridge. Jake is a re- peater builder and an absolute wizard with repeater logic circuitry. (see board below). As it happened, some of Noel’s repeater equip- ment was already with Jake awaiting a possible future project, so Noel readily agreed to donate one of his Tait T800 base stations to the project. That meant that we had most of the hardware already, we just needed the “logic”. Jake was happy to do that for us at a cut-down price and so GB3WL was born as a finished repeater, at least from the hardware side of things. Of course, we now needed somewhere to actually put it! From the outset we wanted to install it in our club shack, but that presented issues that involved my having to negotiate with Wythall House to ensure they were happy to let us have something switched on 24/7 and that it would not cause them any issues. Since repeaters are generally low power devices that thankfully was not too big a hurdle. One that could have raised its head though was the House Car Park! Many normal 1.6MHz split repeaters have suffered severe issues with Car Key fobs which operate around 433 MHz. That last thing we wanted was our new shiny repeater locking everyone out of their BMW’s! This is why we applied for a wide-split repeater, which moves the frequencies outside of where the key fobs operate. Just imagine the irate folk we might have had if we hadn’t consid- ered that! For an antenna, we initially looked at putting something new up, whether we Page 2 Mar—Apr 2014 GB3WL - A new repeater for Wythall Since the Christmas Con- test of 2012, it has been very gratifying to see and hear so many Wythall Ra- dio Club members on air using their radios on 145.225MHz FM. The Ac- tivity Ladder has obviously played a part in that but, nonetheless, it is great to hear so many members actually dusting off their radios and using them! However I have been aware for some time that lots of our members struggle to get a signal to each other on a simplex frequency like 145.225MHz and though many of us have improved our antenna systems to try to get over the problems, sometimes the sheer geography of living somewhere, for example, the “wrong” side of Gorcott Hill means that joining in club “on-air” activities is often a difficult and frustrating exercise. There isn’t really any repeater currently available that covers everyone and which we would not feel guilty “tying up” for club contacts, so the thought occurred to me that what would be a good solution would be to have our own Wythall repeater! The main problems with running a re- peater are a) getting a good site, b) sup- plying mains electricity to power the box, c) maintenance & d) cost. Wythall House is a pretty good location VHF/UHF -wise and since we have mains electricity in the shack, we wouldn’t have a problem getting power to any repeater we installed there, if allowed to do so. With the likes of Barry M0DGQ & Dave G3YXM in the club, we could easily main- tain such a device and we are relatively well-off funds-wise to be able to at least kick off such a project. 2m was never going to be an option for a repeater as the channels are too full around the Midlands and it would simply not even be considered by the authorities. Also we use 2m from the shack quite a lot and we wouldn’t want anything interfering with that. However 70cms? This is a band that the RSGB is keen to promote use of, so that we do not lose it, so looked a good choice. I spoke with Noel G8NDT who is a local repeater “guru” (he keeps GB3GB on 70cms on Barr Beacon and GB3VI on 6m in Birmingham, now sadly off air!) and also with some of the other local repeater keepers and the general consensus was that a 70cms box on the south side of Birmingham would fill in some useful holes in coverage across the wider West Midlands, as well as give our members what they needed, more reliable cover- age between ourselves. Another advan- tage was that more of us could use those handhelds which we all own, that we only seem to get out at Rally times (Vic M0AEJ excepted of course! J) I put together a simple proposal and a short presentation to give at the January 2014 Committee meeting and was pleas- antly surprised that those present were overwhelmingly in favour and so I was duly “elected”(!) Project Manager to see if we could get it off the ground. Noel G8NDT was a fantastic source of encouragement and knowledge in those early days & so it was that one Friday in January we together submitted an online proposal to the RSGB for a repeater – the callsign GB3WL (standing for Wythall) was available, so we plumped for that one. Initially Mike G4VPD acted as Repeater Keeper just so we could get the applica- tion in, but we needed someone with a technical bent to be involved, so I ap- proached Dave G3YXM who thankfully seemed to be very interested in the tech- nical side of the project and he readily agreed to become the Repeater Keeper. This meant that his callsign would eventu- ally have the Notice of Variation (NoV) at- tached to it so he is the “last word” in anything to do with GB3WL. (You have been warned!) Noel, Dave and I are all active on 160m, as many of you know, and

Page 3

Page 3 Mar—Apr 2014 A large green canvas bag..... was working well with good signals on all HF bands and no cross modulation effects. At this Voltage it was drawing about 50mA from the power supply. My supply will actually produce 33V so I gave it a burst of that and the current increased but there was no change in performance, so I returned it to 24V.

If you have a need for an HF receive aerial then one of these may be of use to you, it could be sited well away from your house or any other source of noise. You would need to build a bias tee and find a 24V DC PSU, supply a 1 metre whip and a C-type connector (or modify the mount so that you can plug a BNC straight into the pre-amp). We have an- other three in the bag so it’s first come first served and a donation to club funds would be welcome
 the DX Engineer- ing ARAV-1 which has similar perform- ance is $249!

Dave G3YXM You may have noticed a large green canvas bag in the shack recently, this contained some surplus parts from a Racal HF DF set, donated by Noel G8NDT. Being naturally nosey I had a good rummage in the bag and found the manuals. Inside was a diagram showing how the system was intended to be de- ployed. Four active probe aerials were to be set out in a square pattern and con- nected back to the control box so that the operator could tune into an HF signal (up to 30MHz) and identify which direc- tion it was coming from. Could be use- ful
 but all we had in the bag were the four probe aerials and their mounting stakes, no control box and no cables. Maybe the probe aerials would be useful if I could find out how they worked? Each probe aerial consists of a black plastic housing with the pre-amp in it, which is screwed into a metal pole at- tached to a bracket. The bracket has a U -bolt so that it can be fixed onto one of the heavy pointed stakes that are in the bag. It could be fitted to any pole of around 30mm diameter. On the bottom of the metal tube is a “C- type” connector (it looks like a giant BNC) but if you unscrew the plastic housing from the top of the tube you find that there is a standard BNC connector on the base, which may be easier to find a cable for! On the top of the black housing is a 6mm threaded receptacle into which a one metre whip aerial should fit. These whips are missing from the bag but the length is not critical and a whip from a 2m mo- bile aerial can be used. I found one that just about fitted the thread. Time to try it out. I went down the garden and pushed one of the stakes into the ground, bolted the aerial bracket onto the top and connected it back to the shack with a long length of coax (having even- tually managed to find a C-type adaptor!) I have used “e-probe” aerials before and I already had the “bias tee” available so that I could phantom a DC supply down the coax to power the electronics in the aerial. I connected the supply terminals of my bias tee to a 0-30V DC bench power supply. The manual mentioned 33V, which seemed a bit high to me, so I connected up a receiver and wound the Voltage up slowly. No signals were re- ceived until I got to about 19V when it burst into life. By the time I’d got to 24V it should put it on the House or the tower, but then we realised there was a solution staring us in the face! The tri-band “white- stick” collinear on the House chimney was already there and was not being used on 432MHz at all! In fact it is hardly used for anything other than 2m FM and that usu- ally for Activity Ladder reasons. So we thought, why not use the 70cms portion of that for the repeater, with a duplexer so it could still be used on 2m as well. Some- times the KISS (Keep It Simple, Stupid!) approach has much to commend it! At the time of writing, the project is await- ing the final approval from the House Management, which I am led to believe is a formality, and also clearance from Of- com and the MoD to allow us to switch the repeater on. When that day arrives, I would like Dave G3YXM as Repeater Keeper to do a cere- monial “switching on” and maybe try to make a splash and invite some local dig- nitaries etc. to make a media event of our new arrival. Why? Well, since the box is well protected being underground, you never know the use it might have in the event of a civil emergency of some kind. I hope you have enjoyed reading this short history of GB3WL. We are not even on air yet and already I get the feeling from the members that this is one of the most exciting projects the club has under- taken in recent years. I for one, hope it will encourage people to come on air even more and also help to promote all that is good about Wythall Radio Club to our near neighbours and those driving through the area who will doubtless pop up to use the box. My thanks especially to the Project Team, Dave G3YXM, Noel G8NDT & Jake G1YFF, all of who have been totally “un- amateur” but instead thoroughly profes- sional throughout and without whom, we would have no repeater at all!

Chris G7DDN Project Manager GB3WL PS There are other developments to this story, so it may not be finished just yet – watch this space for what could be done in the future with GB3WL and whether it may yet have a “big brother”!!

GB3WL

Page 4

Page 4 Mar-Apr 2014 More on Repeaters GM8LBC, the RSGB Repeater “Guru”, it makes for a more enjoyable repeater experience Ignore any antisocial and illegal use. Do not acknowledge it at all; this is what abusers crave. Either carry on as if they were not there or leave the repeater. The repeater keeper or those empow- ered to deal with the problem can deal with the misuse through accepted chan- nels.

THE REPEATER KEEPER & THEIR ROLE

In the case of GB3WL, Dave G3YXM is designated as the “Repeater Keeper”. This means he has the legal responsibil- ity for ensuring the station adheres to the licence conditions and is operating correctly. He is also responsible for en- suring that the repeater is working to spec, but will be backed up by other members of the club lending a helping hand. He is also empowered to switch off the repeater in certain circum- stances.

It is also worth remembering that repeat- ers are licensed for ALL radio amateurs to use, whether or not they have contrib- uted in any way to the upkeep of the repeater or are members of Wythall RC.

There is no such thing as a “closed” repeater and we can expect complaints should any station feel that they are being prevented or discouraged from using it, something I am sure Dave G3YXM will be very “hot” on! SOME REPEATER TERMINOLOGY

Listening through - how you announce yourself on the repeater; it refers to the you want to use it, you will also need to program into the same memory, a sub- audible tone. Once done, this is automati- cally transmitted along with your carrier and it inaudibly tells the repeater that you want access it and it lets you in immedi- ately. For GB3WL, this tone will be 67Hz.

There are plenty of members at the club who will help you with programming ra- dios when the time comes. Just ask! GOOD REPEATER OPERATING PRAC- TICE

Listen for a while before transmitting. This gives you an idea of who is around and what to expect Priority should be given to mobile and handheld users above fixed stations Leave a break after your transmission - it allows the timer on the repeater to reset and also gives a convenient gap for new stations to call in The recognised calling procedure is “This is (your callsign) listening through GB3WL” If you can hear the other station on the input channel then you should consider moving to a simplex channel, especially if the repeater is busy Your callsign should be given with suffi- cient frequency to identify you, but does not have to be given on every over Keep your overs short and snappy. Accord- ing to Colin Dalziel WHAT IS A REPEATER?

Repeaters initially became popu- lar in the 1970’s and 1980’s when it became clear that sim- plex contacts for mobiles and handhelds were limited in range on FM.

The idea of a repeater is to be an unattended station, preferably in a good radio location, that can receive low powered stations within its area and then rebroad- cast those signals to everyone within the repeater’s coverage area. It’s as if everyone’s an- tenna is where the repeater’s antenna is situated!

Using a repeater therefore, a half -watt hand portable can now make con- tact with stations well beyond simplex range. This has also opened up contact possibilities for people who can only use HTs, those who live in low lying loca- tions, those in remote areas with no other possibility of local contact and, of course, assist with emergency calls due to the extra coverage afforded and the greater probability of someone listening.

Since a picture is better than a thousand words, take a look at this
 HOW TO USE A REPEATER

To access a repeater you need to make sure you are transmitting and receiving on the correct frequencies. In most ra- dios there is a “repeater shift” option. This usually defaults to the “regular" split frequencies used (-600kHz on 2m and +1.6Mhz on 70cms)

However for GB3WL, you will almost certainly need to programme the correct frequencies into one of your memories. This is because GB3WL has a non- standard +7.6MHz split. You need to be transmitting on 438.550 MHz and when you de-key, you need to be listening on 430.950 MHz

To wake the repeater up and let it know

Page 5

Page 5 Mar—Apr 2014 duplex operation of the unit. Box - another word for repeater Deaf - a deroga- tory term used when a repeater might have a de- sensitisa- tion prob- lem re- sulting in the de- vice not being able to “hear” the input frequency very well K-Break/K-tone - a short gap in trans- mission that users should leave when they end an over, to allow the repeater to reset its timers before other stations come in. It is also courteous to use this K-Break as a chance for other stations to join in by giving their callsign Logic - the controller system that deter- mines the way the repeater functions Timeout - what happens when an input transmission has exceeded the timer set by the logic. Usually the repeater will simply shut down when timeout occurs

MORE ABOUT TIMEOUTS

All repeaters including GB3WL have a timer to prevent the input from being held on indefinitely; two-minute timers are not uncommon in the UK. So if you do rabbit on for longer, the repeater will simply shut down its input and stop re- laying your transmission.

A good idea to avoid this is to setup your radio to de-key itself after 2 minutes. In this way, you will never have the “shame” of being temporarily kicked off the box!

For more information and further read- ing, go to http://www.ukrepeater.net/ documents/getting_started.pdf

Chris G7DDN Project Manager GB3WL Having installed my old Shakespeare Marine vertical a while ago as a ground-mounted vertical, today was radial laying day. I’ve read that laying your radials out in the spring, across the lawn, means that the grass will grow up and gradu- ally bury them un- der the grass thatch. I hope so! Since I’m only hav- ing a test, I laid out 16 radials across a 180 degree arc. I can’t lay any radials in the other arc since the house is in the way. I used PVC coated 7 strand D10 military wire which has seven small strands; four steel and three copper. They are the maxi- mum length that fits in my small yard here, between about 6m and 12m in length. Near the feedpoint, I drilled a large hole in a piece of redundant 1 inch wood and fed all the radials through this and under some gravel to the ATU. I did the same at each end of every radial; a small hole which al- lowed the D10 to snake through before hammer- ing them into the ground under tension. The bundle of radials connects to an SG230 Contd... ATU which I screwed to the wall right next to the vertical and used a small 12V DC gell battery to power it. Some days, you get lucky and today was one of them. I found a in my junk box, a 15m section of low-loss coax already with PL259 connectors on. I also discovered a neat 1 inch hole that I had drilled though previously (and sub- sequently gooped up with mastik) very close to the ideal entry point to my “bunker”. Cleaning the goop out was fairly straight forward and the coax length was so perfect, I couldn’t have cut it any cleaner. Lucky day indeed. Results: As predicted, local (zero to 500 miles) sig- nals on 40m are rubbish but from 14 MHz upwards it really has some legs. I can easily copy signals across the Atlantic and the SG230 tunes every band and (from 160m to 10m) with ease. What a good day for hav- ing fun with RF. 73. Callum.M0MCX

Marine Vertical with radials

Page 6

Page 6 Mar-Apr 2014 Kenwood TS -990s User Review I finally took delivery of my TS990s in early January 2014 and it came with the latest firmware from the factory. First impres- sions, distilled into single words: massive, engineered, beautiful, functional, imposing, radio bling. But not a microphone in sight which I thought was pretty odd but they must have got their sums right, I would never had used a cheap mic on this won- derful radio anyway since I use a stick mic on a table boom (Heil Goldline) but it would have been good to check without making up a cable. Everything about this rig is solid. My expec- tations had been managed by all the arti- cles that I’ve read on the internet about the radio and I double checked the radio when I compared both the FTdx5000MP and the TS -990s at the RSGB convention in late 2013. For me, the TS-990s was the winner, although more expensive. The main reason for switching my allegiance from Yaesu was the size (I like very large radios), the in-built monitor and scope function, and particularly the fact that a single USB cable connects the rig to my WIndows 7 PC, effectively de-cluttering my MK2R+ SO2R system. I was fed up with all the wires eve- rywhere.

Initially, I connected the rig to my 40m loop, a full wave triangle in the garden at about 20 feet. It took a few days to build my confi- dence but I heard some stations working UBA contest and made a few fast contacts. James (M0YOM) came around and we played with the roofing filters. I set up three main parameters, wide, intermediate and very sharp. Together with the width and shift, these seemed extremely effective in dialling out close QRM. There appeared to be no overload with close-too stations. Hooking up to Ham Radio Deluxe was a breeze, however like all things on the TS990s, the defini- tion of a breeze is sitting for two hours and a cup of coffee thumbing the manual and cross referencing many chapters. Finally PSK31, PTT and the rest of the regular rig-controls were working. HRD doesn’t support the TS-990s natively, however selecting the TS-590 does. I really thought I needed a new rig be- cause I like to use my radio in the eve- ning which means mostly 40m and 80m. These bands can be pretty tight, espe- cially when there are contests on. My FT-1000MP used to have a hard time copying a weak station when I was tucked up right next to a loud one. The num- bers suggested that I’d have a heck of an easier time with this radio.

Tonight, I used her in anger for the first time in the RSGB 80m SSB Club Championships on 80m. a few hun- dred stations crammed into a hundred kilohertz or so. I was genu- inely blown away when I really did copy and make exchanges with very quiet stations whilst I was just 1kHz down from the next guy. Yes there is QRM still but nothing like I have been used to. No overload or crunching groans this time. I used the very tight roofing filter and dialled in about 1600 Hz on the bandwidth and happily conversed. This is truly a remarkable rig. My thanks to Martin and the crew at Martin Lynch Ham Radio for supplying and making sure I got a great deal with the SP990 speaker, thrown in for free. Full reviews are available on the inter- net so I won’t give you all the numbers and features suffice to say, it really does do what it says on the tin; 200w output, on-board PSK and FSK decode and 300 pages of more stuff than you could probably ever digest.

Callum M0MCX

.

Page 7

Page 7 Mar—Apr 2014 Wythall Radio Club members are now looking forward to April and our Easter Contest where there is the little matter of chocolate eggs to be won! Stacey M6STJ also winning certificates. Ian M0IDR completed the certificate winners with a special award for the highest score from a non-local member. Our thanks go to Lee G0MTN for his untiring work on the organisation and software fronts – and for putting adjudi- cating our contest ahead of some little event he also helps adjudicate called “CQ Worldwide”!!! Christmas Contest results night at Wythall Radio Club tonight was full of surprises as always! Participation in this event has gone through the roof again with over 50 members taking part and over 40 logs submitted, an all-time re- cord. The overall winner in the Open Section, and thus the winner of the Reg Brown G7OJO Trophy for 2014 is Stuart M0NYP. Chairman Mike G4VPD fin- ished in second place and David G7IBO picked up the 3rd place certificate. In the 2 metre FM section, it was quite a family affair with the “Voice of the Mid- lands” Jim 2E0BLP coming out on top, just pipping his own son(!) Kevin M6NCO into second place. Third was a very creditable showing from club foun- der member, Colin G6ZDQ. There were sterling efforts too from our lady members with Dawn M6UDY and 2013 Xmas Contest Results Pictures: Bottom left: Jim 2E0BLP receiving FM only trophy from Lee G0MTN: Left middle: Stew M0NYP receiving G7OJO Trophy from Lee Left: Stacey M6STJ receiving Certificate for Leading Foundation in FM section Above: Dawn M6UDY receiving Certificate for Leading Foundation in Open section

Page 8

Wythall Rally cont..d Editor: Chris Pettitt G0EYO, 23 Dark Lane, Hollywood, Birmingham, B47 5BS. Phone: 07710 412 819, E-mail: g0eyo@blueyonder.co.uk Page 8 Mar—Apr 2014 The next issue of the Wythall Radio Club Newsletter will be published at the beginning of June 2014 February and March brought a number of passes for the club’s training candidates. Darren now M0WYH passed his Ad- vanced re-sit and our class of five Foun- dation students got high marks in their passes. Hopefully they will have got their new callsigns allo- cated to them by the time you read this. From left to right; Jamie, Gavin, Kevin, Darren and Craig.

Club member George M6LTE couldn’t wait for us run an intermediate course so decided to go in for self-tuition but sought the club’s help to do the practical assesse- ments and organise the exam for him. I am pleased to say that George passed and will be seeking his new 2E0 callsign, unless of course he goes straight on to the Ad- vanced licence. Our online Foundation course began in mid February and we have 6 stu- dents study- ing for that with their exam sched- uled for March 29th.

Well done and good luck to all

Chris G0EYO Training News